2" gap added behind pullout — closed front faces now align. 2026-05-09.
v1.0 — what's locked:
Closet: 77"W × 76"D × 84"H. Front 14" = electrical zone (no cabinets). Back 62" = usable.
Left cab: 57"W × 20"D × 81"H. Pair of center-opening doors above + 2 drawers below.
Left interior (Option X): drawers 0-12", shoe shelf 12-20" (sneakers/loafers), lower rod @ 50", upper rod @ 80". ~36 shirts double-stacked.
Right pullout: 20"W × 60"D × 81"H. Front 36" = 2 shoe shelves + rod @ 70" for shirts. Back 24" = tall open dress compartment, rod @ 78". Sits 2" forward of the back wall so its closed front face aligns with the left cab front face plane.
Hardware: Right pullout on Accuride 3640 (or equivalent) heavy-duty full-extension slides — 100 lb+ capacity, 60" travel, cab body fully clears the closet face.
Dead zone access (Option A): ~57" × 42" cubby behind the left cab. Accessed by pulling the right cab fully out and walking back through the empty channel. Shelving on back wall + left wall holds bulky / off-season items.
Plan View
Front Elevation
Left Cab Interior
Right Pullout Interior (section)
Next: Structural Blueprint Set
Once you sign off on v1.0, the next round adds the build-it drawings:
Carcass framing plan — every panel of the cabinet box (top, bottom, sides, back) with dimensions and plywood thickness
Internal cleat / rod / shelf placement — where each support strip lands, in inches off the floor
Drawer box dimensions — drawer carcass sizing for the slides you choose
Cut list — every piece of plywood/lumber with dimensions, ready for the lumber yard